Home / ServerCore / HOW TO ASSIGN IP ADDRESS TO SERVER CORE

HOW TO ASSIGN IP ADDRESS TO SERVER CORE

Posted by Unknown Selasa, 15 Januari 2013 0 komentar

DHCP ADDRESS

Type: netsh interface ipv4 set address name=”local area connection” source=DHCP
NOTE: For IPv6 just replace ipv4 with ipv6

SET STATIC IP ADDRESS

To see the network interface

Type: netsh interface ipv4 show interfaceand enter.

Look at the number shown in the idx column of the output for your network adapter.

Type: netsh interface ipv4 set address name=”local area connection” source=static address=192.168.0.1 mask=255.255.255.0 gateway=192.168.0.10 and enter.

NOTE: If you don't you have a default getaway then there is no need for you to bring the default getaway. For IPv6 just replace ipv4 with ipv6 and the IP addresses put IPv6 addresses in there.

SET DNS IP ADDRESS

Type: netsh interface ipv4 add dnsserver name=”local area connection” address=192.168.0.1 index=1

NOTE:index=1 is the preferred DNS ip address and index=2 is the alternative DNS ip address.

Verify by typing ipconfig /all and check that all the ip addresses are correct.For IPv6 just replace ipv4 with ipv6.

TERIMA KASIH ATAS KUNJUNGAN SAUDARA

Judul: HOW TO ASSIGN IP ADDRESS TO SERVER CORE
Ditulis oleh Unknown
Rating Blog 5 dari 5

Semoga artikel ini bermanfaat bagi saudara. Jika ingin mengutip, baik itu sebagian atau keseluruhan dari isi artikel ini harap menyertakan link dofollow ke http://samsung-galaxy-core-review.blogspot.com/2013/01/how-to-assign-ip-address-to-server-core.html. Terima kasih sudah singgah membaca artikel ini.