HOW TO ASSIGN IP ADDRESS TO SERVER CORE
Selasa, 15 Januari 2013
0
komentar
DHCP ADDRESS
Type: netsh interface ipv4 set address name=”local area connection” source=DHCP
NOTE: For IPv6 just replace ipv4 with ipv6
NOTE: For IPv6 just replace ipv4 with ipv6
SET STATIC IP ADDRESS
To see the network interface
Type: netsh interface ipv4 show interfaceand enter.
Look at the number shown in the idx column of the output for your network adapter.
Type: netsh interface ipv4 set address name=”local area connection” source=static address=192.168.0.1 mask=255.255.255.0 gateway=192.168.0.10 and enter.
NOTE: If you don't you have a default getaway then there is no need for you to bring the default getaway. For IPv6 just replace ipv4 with ipv6 and the IP addresses put IPv6 addresses in there.
SET DNS IP ADDRESS
Type: netsh interface ipv4 add dnsserver name=”local area connection” address=192.168.0.1 index=1
NOTE:index=1 is the preferred DNS ip address and index=2 is the alternative DNS ip address.
Verify by typing ipconfig /all and check that all the ip addresses are correct.For IPv6 just replace ipv4 with ipv6.
Baca Selengkapnya ....
